LUBRICATION-FREE

smorjfriSteel/PTFE
Forged for extreme loads

 


se-HdutyRM

TYPE D2 B M O D1 F L GL ØA Thread Stat. load   Weight
                    G Radial Axial a° gram
                      KP KP    
RM 6-XE 6 9 6,75 8,9 20 36 46 20 11,112 M6x1 980 490 13 20
RM 8-XE 8 12 9 10,4 24 42 54 22 12,700 M8x1,25 1950 780 13 33
  RM 10-XE 10 14 10,5 12,9 28 48 62 25 15,875 M10x1,5 3140 1130 13 56
  RM 12-XE 12 16 12 15,4 32 54 70 29 19,050 M12x1,75 4220 1520 13 87
 
RM 14-XE 14 19 13,5 16,8 36 60 78 38 25,400 M14x2 5690 1950 15 129
RM 16-XE 16 21 15 19,3 42 66 87 40 28,575 M16x2 6720 2450 15 189
RM 18-XE 18 23 16,5 21,8 46 72 95 44 31,750 M18x1,5 8140 2940 15 267
RM 20-XE 20 25 18 24,3 50 78 103 47 34,925 M20x1,5 9370 3530 15 348
 
RM 22-XE 22 28 20 25,8 54 84 111 51 38,100 M22x1,5 11380 4340 15 443
RM 25-XE 25 31 22 29,6 60 94 124 57 42,850 M24x2 13540 5350 15 600
RM 30-XE 30 37 25 34,8 70 110 145 66 50,800 M30x2 18440 7210 15 1030
RM 35-XE 35 43 28 37,7 80 125 165 75 57,150 M36x2 23000 9500 15 1600

Thread: ISO-DIN 13-6H.
For left-thread type RML … XE. Rolled thread. All sizes are available with fine thread eg M14x1,5

Lubrication: Lubrication-free. Low friction fabric with PTFE and bronze reinforced back, glued in steel bushing.

Bearing gap:Radial 0,030-0,050 mm. Axially 0,050-0,090 mm. Reduced or larger gap can be delivered.

Special design: Chromium plated, special grease, chemical nickel plating, hard chromed inner ring, special grease, hardened body for 30-50% higher load, fingertip etc.
See also the MTE series.