GREASABLE
Steel/Bronze
For lower loads
Split bronze bushing
| TYPE | D2 | D1 | B | M | O | ØA | Stat. load | Max | Weight | |
| Radial | rpm | a° | gram | |||||||
| RS 5 | 5 | 16 | 8 | 6 | 7,7 | 11,110 | 1000 | 900 | 13 | 8 |
| RS 6 | 6 | 18 | 9 | 6,75 | 8,9 | 12,700 | 1280 | 760 | 13 | 12 |
| RS 8 | 8 | 22 | 12 | 9 | 10,4 | 15,875 | 2160 | 620 | 13 | 23 |
| RS 10 | 10 | 26 | 14 | 10,5 | 12,9 | 19,050 | 3000 | 500 | 13 | 38 |
| RS 12 | 12 | 30 | 16 | 12 | 15,4 | 22,225 | 4000 | 450 | 13 | 58 |
| RS 14 | 14 | 34 | 19 | 13,5 | 16,8 | 25,400 | 5160 | 360 | 15 | 83 |
| RS 16 | 16 | 38 | 21 | 15 | 19,3 | 28,575 | 6440 | 350 | 15 | 115 |
| RS 18 | 18 | 42 | 23 | 16,5 | 21,8 | 31,750 | 7840 | 320 | 15 | 150 |
| RS 20 | 20 | 46 | 25 | 18 | 24,3 | 34,925 | 9440 | 280 | 15 | 200 |
| RS 22 | 22 | 50 | 28 | 20 | 25,8 | 38,100 | 11440 | 250 | 15 | 270 |
| RS 25 | 25 | 56 | 31 | 22 | 29,6 | 42,850 | 14160 | 230 | 15 | 375 |
| RS 30 | 30 | 66 | 37 | 25 | 34,6 | 50,800 | 18150 | 200 | 15 | 540 |
Lubrication: Through lubrication holes in outer ring to lubrication grooves around the bearing.
Bearing gap: Radial 0,030-0,060 mm. Axially 0,060-0,090 mm. Reduced or larger gap can be delivered.
Special design: Chromium plated, chemical nickel plating, hard chromed inner ring etc.